Reviews MDP Multidose Kit of Technetium Injection


No reviews yet.

MDP Multidose Kit of Technetium Injection Drug Description
MDP Multidose Kit
for the Preparation of Technetium Tc99m Medronate Injection
DIAGNOSTIC - FOR INTRAVENOUS USE
DRUG DESCRIPTION
Each kit contains 10 multidose reaction vials, each containing 10 mg of medronic acid, 0.17 mg (minimum) stannous chloride (maximum stannous and stannic chloride 0.29 mg), and 2 mg ascorbic acid. The contents of the vial are sterile, pyrogen-free, lyophilized and sealed under nitrogen. The pH has been adjusted to 4.0-7.8 with hydrochloric acid and sodium hydroxide.
Administration is by intravenous injection for diagnostic use, after reconstitution with oxidant-free sodium pertechnetate Tc99m injection. The product as supplied is sterile and pyrogen-free.
The precise structure of stannous technetium Tc99m medronate complex is unknown at this time.
Physical Characteristics
Technetium Tc99m decays by isomeric transition with a physical half-life of
6.02 hours.1 The principal photon that is useful for detection and
imaging studies is listed in Table 1.
Table 1. Principal Radiation Emission Data1



Radiation
Mean %/Disintegration
Mean Energy (keV)


Gamma-2
89.07
140.5


1Kocher, David C, “Radioactive Decay Data Tables,”
DOE/TIC-11026, 108 (1981).



External Radiation
The specific gamma ray constant for Tc99m is 0.78 R/hr-mCi at 1 cm. The first half-value layer is 0.017 cm of Pb. A range of values for the relative attenuation of the radiation emitted by this radionuclide that results from interposition of various thicknesses of Pb is shown in Table 2. For example, the use of a 0.25 cm thickness of Pb will attenuate the radiation emitted by a factor of 1,000.
Table 2. Radiation Attenuation of Lead (Pb) Shielding



Shield Thickness
(Pb) cm
Coefficient
of Attenuation


0.017
0.5


0.08
10-1


0.16
10-2


0.25
10-3


0.33
10-4



To correct for physical decay of this radionuclide, the fractions that remain at selected intervals after the time of calibration are shown in Table 3.
Table 3. Physical Decay Chart: Tc99m, half-life 6.02 hours



Hours
Fraction
Remaining
Hours
Fraction
Remaining


0*
1.000
5
0.562


1
0.891
6
0.501


2
0.794
8
0.398


3
0.708
10
0.316


4
0.631
12
0.251


*Calibration Time


Last reviewed on RxList: 10/3/2007




MDP Multidose Kit of Technetium Injection Drug Description
MDP Multidose Kit
for the Preparation of Technetium Tc99m Medronate Injection
DIAGNOSTIC - FOR INTRAVENOUS USE
DRUG DESCRIPTION
Each kit contains 10 multidose reaction vials, each containing 10 mg of medronic acid, 0.17 mg (minimum) stannous chloride (maximum stannous and stannic chloride 0.29 mg), and 2 mg ascorbic acid. The contents of the vial are sterile, pyrogen-free, lyophilized and sealed under nitrogen. The pH has been adjusted to 4.0-7.8 with hydrochloric acid and sodium hydroxide.
Administration is by intravenous injection for diagnostic use, after reconstitution with oxidant-free sodium pertechnetate Tc99m injection. The product as supplied is sterile and pyrogen-free.
The precise structure of stannous technetium Tc99m medronate complex is unknown at this time.
Physical Characteristics
Technetium Tc99m decays by isomeric transition with a physical half-life of
6.02 hours.1 The principal photon that is useful for detection and
imaging studies is listed in Table 1.
Table 1. Principal Radiation Emission Data1



Radiation
Mean %/Disintegration
Mean Energy (keV)


Gamma-2
89.07
140.5


1Kocher, David C, “Radioactive Decay Data Tables,”
DOE/TIC-11026, 108 (1981).



External Radiation
The specific gamma ray constant for Tc99m is 0.78 R/hr-mCi at 1 cm. The first half-value layer is 0.017 cm of Pb. A range of values for the relative attenuation of the radiation emitted by this radionuclide that results from interposition of various thicknesses of Pb is shown in Table 2. For example, the use of a 0.25 cm thickness of Pb will attenuate the radiation emitted by a factor of 1,000.
Table 2. Radiation Attenuation of Lead (Pb) Shielding



Shield Thickness
(Pb) cm
Coefficient
of Attenuation


0.017
0.5


0.08
10-1


0.16
10-2


0.25
10-3


0.33
10-4



To correct for physical decay of this radionuclide, the fractions that remain at selected intervals after the time of calibration are shown in Table 3.
Table 3. Physical Decay Chart: Tc99m, half-life 6.02 hours



Hours
Fraction
Remaining
Hours
Fraction
Remaining


0*
1.000
5
0.562


1
0.891
6
0.501


2
0.794
8
0.398


3
0.708
10
0.316


4
0.631
12
0.251


*Calibration Time


Last reviewed on RxList: 10/3/2007




MDP Multidose Kit of Technetium Injection Drug Description
MDP Multidose Kit
for the Preparation of Technetium Tc99m Medronate Injection
DIAGNOSTIC - FOR INTRAVENOUS USE
DRUG DESCRIPTION
Each kit contains 10 multidose reaction vials, each containing 10 mg of medronic acid, 0.17 mg (minimum) stannous chloride (maximum stannous and stannic chloride 0.29 mg), and 2 mg ascorbic acid. The contents of the vial are sterile, pyrogen-free, lyophilized and sealed under nitrogen. The pH has been adjusted to 4.0-7.8 with hydrochloric acid and sodium hydroxide.
Administration is by intravenous injection for diagnostic use, after reconstitution with oxidant-free sodium pertechnetate Tc99m injection. The product as supplied is sterile and pyrogen-free.
The precise structure of stannous technetium Tc99m medronate complex is unknown at this time.
Physical Characteristics
Technetium Tc99m decays by isomeric transition with a physical half-life of
6.02 hours.1 The principal photon that is useful for detection and
imaging studies is listed in Table 1.
Table 1. Principal Radiation Emission Data1



Radiation
Mean %/Disintegration
Mean Energy (keV)


Gamma-2
89.07
140.5


1Kocher, David C, “Radioactive Decay Data Tables,”
DOE/TIC-11026, 108 (1981).



External Radiation
The specific gamma ray constant for Tc99m is 0.78 R/hr-mCi at 1 cm. The first half-value layer is 0.017 cm of Pb. A range of values for the relative attenuation of the radiation emitted by this radionuclide that results from interposition of various thicknesses of Pb is shown in Table 2. For example, the use of a 0.25 cm thickness of Pb will attenuate the radiation emitted by a factor of 1,000.
Table 2. Radiation Attenuation of Lead (Pb) Shielding



Shield Thickness
(Pb) cm
Coefficient
of Attenuation


0.017
0.5


0.08
10-1


0.16
10-2


0.25
10-3


0.33
10-4



To correct for physical decay of this radionuclide, the fractions that remain at selected intervals after the time of calibration are shown in Table 3.
Table 3. Physical Decay Chart: Tc99m, half-life 6.02 hours



Hours
Fraction
Remaining
Hours
Fraction
Remaining


0*
1.000
5
0.562


1
0.891
6
0.501


2
0.794
8
0.398


3
0.708
10
0.316


4
0.631
12
0.251


*Calibration Time


Last reviewed on RxList: 10/3/2007




MDP Multidose Kit of Technetium Injection Drug Description
MDP Multidose Kit
for the Preparation of Technetium Tc99m Medronate Injection
DIAGNOSTIC - FOR INTRAVENOUS USE
DRUG DESCRIPTION
Each kit contains 10 multidose reaction vials, each containing 10 mg of medronic acid, 0.17 mg (minimum) stannous chloride (maximum stannous and stannic chloride 0.29 mg), and 2 mg ascorbic acid. The contents of the vial are sterile, pyrogen-free, lyophilized and sealed under nitrogen. The pH has been adjusted to 4.0-7.8 with hydrochloric acid and sodium hydroxide.
Administration is by intravenous injection for diagnostic use, after reconstitution with oxidant-free sodium pertechnetate Tc99m injection. The product as supplied is sterile and pyrogen-free.
The precise structure of stannous technetium Tc99m medronate complex is unknown at this time.
Physical Characteristics
Technetium Tc99m decays by isomeric transition with a physical half-life of
6.02 hours.1 The principal photon that is useful for detection and
imaging studies is listed in Table 1.
Table 1. Principal Radiation Emission Data1



Radiation
Mean %/Disintegration
Mean Energy (keV)


Gamma-2
89.07
140.5


1Kocher, David C, “Radioactive Decay Data Tables,”
DOE/TIC-11026, 108 (1981).



External Radiation
The specific gamma ray constant for Tc99m is 0.78 R/hr-mCi at 1 cm. The first half-value layer is 0.017 cm of Pb. A range of values for the relative attenuation of the radiation emitted by this radionuclide that results from interposition of various thicknesses of Pb is shown in Table 2. For example, the use of a 0.25 cm thickness of Pb will attenuate the radiation emitted by a factor of 1,000.
Table 2. Radiation Attenuation of Lead (Pb) Shielding



Shield Thickness
(Pb) cm
Coefficient
of Attenuation


0.017
0.5


0.08
10-1


0.16
10-2


0.25
10-3


0.33
10-4



To correct for physical decay of this radionuclide, the fractions that remain at selected intervals after the time of calibration are shown in Table 3.
Table 3. Physical Decay Chart: Tc99m, half-life 6.02 hours



Hours
Fraction
Remaining
Hours
Fraction
Remaining


0*
1.000
5
0.562


1
0.891
6
0.501


2
0.794
8
0.398


3
0.708
10
0.316


4
0.631
12
0.251


*Calibration Time


Last reviewed on RxList: 10/3/2007




MDP Multidose Kit of Technetium Injection Drug Description
MDP Multidose Kit
for the Preparation of Technetium Tc99m Medronate Injection
DIAGNOSTIC - FOR INTRAVENOUS USE
DRUG DESCRIPTION
Each kit contains 10 multidose reaction vials, each containing 10 mg of medronic acid, 0.17 mg (minimum) stannous chloride (maximum stannous and stannic chloride 0.29 mg), and 2 mg ascorbic acid. The contents of the vial are sterile, pyrogen-free, lyophilized and sealed under nitrogen. The pH has been adjusted to 4.0-7.8 with hydrochloric acid and sodium hydroxide.
Administration is by intravenous injection for diagnostic use, after reconstitution with oxidant-free sodium pertechnetate Tc99m injection. The product as supplied is sterile and pyrogen-free.
The precise structure of stannous technetium Tc99m medronate complex is unknown at this time.
Physical Characteristics
Technetium Tc99m decays by isomeric transition with a physical half-life of
6.02 hours.1 The principal photon that is useful for detection and
imaging studies is listed in Table 1.
Table 1. Principal Radiation Emission Data1



Radiation
Mean %/Disintegration
Mean Energy (keV)


Gamma-2
89.07
140.5


1Kocher, David C, “Radioactive Decay Data Tables,”
DOE/TIC-11026, 108 (1981).



External Radiation
The specific gamma ray constant for Tc99m is 0.78 R/hr-mCi at 1 cm. The first half-value layer is 0.017 cm of Pb. A range of values for the relative attenuation of the radiation emitted by this radionuclide that results from interposition of various thicknesses of Pb is shown in Table 2. For example, the use of a 0.25 cm thickness of Pb will attenuate the radiation emitted by a factor of 1,000.
Table 2. Radiation Attenuation of Lead (Pb) Shielding



Shield Thickness
(Pb) cm
Coefficient
of Attenuation


0.017
0.5


0.08
10-1


0.16
10-2


0.25
10-3


0.33
10-4



To correct for physical decay of this radionuclide, the fractions that remain at selected intervals after the time of calibration are shown in Table 3.
Table 3. Physical Decay Chart: Tc99m, half-life 6.02 hours



Hours
Fraction
Remaining
Hours
Fraction
Remaining


0*
1.000
5
0.562


1
0.891
6
0.501


2
0.794
8
0.398


3
0.708
10
0.316


4
0.631
12
0.251


*Calibration Time


Last reviewed on RxList: 10/3/2007





Other reviews about MDP Multidose Kit of Technetium Injection on web:

Learn about the prescription medication MDP Multidose Kit of Technetium Injection (Technetium Tc99m Medronate Injection), drug uses, dosage, side effects, drug interactions ... MDP Multidose Kit of Technetium Injection (Technetium Tc99m ...


MDP Multidose Kit for the Preparation of Technetium Tc 99m Medronate; Injection DIAGNOSTIC-FOR INTRAVENOUS USE DESCRIPTION: Each kit contains 10 multidose reaction vials, each ... MDP Multidose


sciencestage.com ScienceStage.com is a virtual conference room, lecture hall, laboratory, library and meeting venue all in one. mdp-multidose-kit-of-technetium-injection-drug sciencestage ...


MDP Multidose Kit for the Preparation of Technetium Tc99m Medronate Injection DIAGNOSTIC - FOR INTRAVENOUS USE DESCRIPTION Each kit contains 10 multidose reaction vials, each containing ... Quark for pdf


MDP Multidose Utilipak Kit for the Preparation of Technetium Tc99m Medronate Injection MDP Multidose UtilipakKit for the Preparation of Technetium Tc99m ...


MDP Multidose Kit for the Preparation of Technetium Tc99m Medronate Injection MDP MultidoseKit for the Preparation of Technetium Tc99m Medronate ...


MDP Multidose Kit for the Preparation of Technetium Tc99m Medronate Injection. DIAGNOSTIC - FOR INTRAVENOUS USE. MDP Description ... and Usage for MDP. Technetium Tc99m medronate injection ... MDP Official FDA information, side effects and uses.


DMSA (Kit for the Preparation of Technetium Tc99m Succimer Injection) ... MDP Multidose ... following intravenous injection of technetium ... MDP Multidose - Nuclear Imaging Agents - GE Healthcare


MDP MULTIDOSE UTILIPAK Kit for the Preparation of Technetium Tc99m Medronate Injection Diagnostic - For Intravenous Use Clinical:Mdp (Medronic acid) - Medpedia


... MDP Kit for the Preparation of Technetium Tc99m Medronate for Injection Diagnostic ... for Injection DESCRIPTION: Kit for the Preparation of Technetium Tc 99m Medronate is a multidose ... MDP Kit for the Preparation of Technetium Tc99m Medronate for ...





Featured Reviews

Reviews Ketoconazole Foam, 2%

Extina Drug Description Extina® (ketoconazole foam, 2%) For topical use only DRUG DESCRIPTION What are the possible side effects of ketoconazole topical (Extina, Kuric, Nizoral A-D, Nizoral Topical, Xolegel)? Get emergency...
Read More  |  Review This
Reviews Meperidine

Demerol Drug Description Demerol® (meperidine hydrochloride, USP) WARNING: May be habit forming DRUG DESCRIPTION What are the possible side effects of meperidine (Demerol HCl)? Get emergency medical help if you have any of...
Read More  |  Review This
Reviews Lamisil Oral Granules

Lamisil Oral Granules Drug Description Lamisil® Oral Granules (terbinafine hydrochloride) DRUG DESCRIPTION What are the possible side effects of terbinafine (Lamisil)? Get emergency medical help if you have any of these signs...
Read More  |  Review This
Reviews Etopophos

Etopophos Drug Description ETOPOPHOS (etoposide phosphate) for Injection WARNINGS ETOPOPHOS (etoposide phosphate) for Injection should be administered under the supervision of a qualified physician experienced in the use of cancer...
Read More  |  Review This
Reviews Nomasvello

Recently i've met with Nicoleta Mincu from Nomasvello Romania. She presented me this great opportunity of opening a nomasvello franchise in romania. The costs are pretty low: 30k eur (in rates) + a monthly cost of 400 eur. The incomes are quite...
Read More  |  Review This
Recent News
59sec - the BEST lead management system around!
We tested 59sec - THE lead management system and we love it. 59sec helps small and medium companies to answer leads in maximum 59 seconds. Why...
MOVEorPAY - our favorite facebook app
We do love MOVEorPAY motivational facebook app, because it is very cool and useful. It makes you finish stuff that you know are good for you, but from various reasons, you never do...
ReviewsAZ is almost ready to be officially launched
yes, we have just a few loose ends to tie and we are ready to go :) meanwhile, I am putting some reviews on the site, so people will not get an empty site at the launch....