Reviews Liposyn III


No reviews yet.

Liposyn III Drug Description
Liposyn® III
(Intravenous Fat Emulsion)
DRUG DESCRIPTION
Liposyn III (Intravenous Fat Emulsion) is a sterile, nonpyrogenic fat emulsion for intravenous administration. It is supplied in both a 10% and 20% concentration.
Liposyn III 10% contains 10% soybean oil, up to 1.2% egg phosphatides added as an emulsifier and 2.5% glycerin in water for injection. Sodium hydroxide has been added for pH adjustment. pH 8.3 (6.0 to 9.0). Liposyn III 10% has an osmolarity of 284 mOsmol/L (approx.) and a specific gravity of 0.995. The total caloric value of Liposyn III 10% including fat, phospholipid and glycerol is 1.1 kcal/mL. Of this total, approximately 0.5 kcal/mL is supplied by linoleic acid.
Liposyn III 20% contains 20% soybean oil, 1.2% egg phosphatides and 2.5% glycerin in water for injection. Sodium hydroxide has been added for pH adjustment. pH 8.3 (6.0 to 9.0). Liposyn III 20% has an osmolarity of 292 mOsmol/L (approx.) and a specific gravity of 0.988. The total caloric value of Liposyn III 20% including fat, phospholipid and glycerol is 2.0 kcal/mL. Of this total, approximately 1.0 kcal/mL is supplied by linoleic acid.
Both Liposyn III 10% and Liposyn III 20% contain emulsified fat particles of approximately 0.4 micron in diameter, similar to naturally occurring chylomicrons.
Soybean Oil, USP is a mixture of neutral triglycerides with the following structure:
















are saturated and unsaturated fatty acid residues. The major component fatty
acids are approximately 54.5% linoleic, 22.4% oleic, 10.5% palmitic, 4.2% stearic,
and 8.3% linolenic acid. These fatty acids have the following chemical and structural
formulas:








Egg phosphatides, purified, are primarily a mixture of naturally occurring phospholipids which are isolated from the egg yolk. These phospholipids have the following general structure:
















are the same saturated and unsaturated fatty acid residues that abound in neutral
fats. R3 is primarily either the choline [HOCH2CH2N(CH3)30H]
ester or ethanolamine (HOCH2CH2NH2) ester of
phosphoric acid (H3PO4).
Glycerin, USP is chemically designated C3H803 and is a clear, colorless, hygroscopic
syrupy liquid. It has the following structural formula:







Last reviewed on RxList: 2/2/2009




Liposyn III Drug Description
Liposyn® III
(Intravenous Fat Emulsion)
DRUG DESCRIPTION
Liposyn III (Intravenous Fat Emulsion) is a sterile, nonpyrogenic fat emulsion for intravenous administration. It is supplied in both a 10% and 20% concentration.
Liposyn III 10% contains 10% soybean oil, up to 1.2% egg phosphatides added as an emulsifier and 2.5% glycerin in water for injection. Sodium hydroxide has been added for pH adjustment. pH 8.3 (6.0 to 9.0). Liposyn III 10% has an osmolarity of 284 mOsmol/L (approx.) and a specific gravity of 0.995. The total caloric value of Liposyn III 10% including fat, phospholipid and glycerol is 1.1 kcal/mL. Of this total, approximately 0.5 kcal/mL is supplied by linoleic acid.
Liposyn III 20% contains 20% soybean oil, 1.2% egg phosphatides and 2.5% glycerin in water for injection. Sodium hydroxide has been added for pH adjustment. pH 8.3 (6.0 to 9.0). Liposyn III 20% has an osmolarity of 292 mOsmol/L (approx.) and a specific gravity of 0.988. The total caloric value of Liposyn III 20% including fat, phospholipid and glycerol is 2.0 kcal/mL. Of this total, approximately 1.0 kcal/mL is supplied by linoleic acid.
Both Liposyn III 10% and Liposyn III 20% contain emulsified fat particles of approximately 0.4 micron in diameter, similar to naturally occurring chylomicrons.
Soybean Oil, USP is a mixture of neutral triglycerides with the following structure:
















are saturated and unsaturated fatty acid residues. The major component fatty
acids are approximately 54.5% linoleic, 22.4% oleic, 10.5% palmitic, 4.2% stearic,
and 8.3% linolenic acid. These fatty acids have the following chemical and structural
formulas:








Egg phosphatides, purified, are primarily a mixture of naturally occurring phospholipids which are isolated from the egg yolk. These phospholipids have the following general structure:
















are the same saturated and unsaturated fatty acid residues that abound in neutral
fats. R3 is primarily either the choline [HOCH2CH2N(CH3)30H]
ester or ethanolamine (HOCH2CH2NH2) ester of
phosphoric acid (H3PO4).
Glycerin, USP is chemically designated C3H803 and is a clear, colorless, hygroscopic
syrupy liquid. It has the following structural formula:







Last reviewed on RxList: 2/2/2009




Liposyn III Drug Description
Liposyn® III
(Intravenous Fat Emulsion)
DRUG DESCRIPTION
Liposyn III (Intravenous Fat Emulsion) is a sterile, nonpyrogenic fat emulsion for intravenous administration. It is supplied in both a 10% and 20% concentration.
Liposyn III 10% contains 10% soybean oil, up to 1.2% egg phosphatides added as an emulsifier and 2.5% glycerin in water for injection. Sodium hydroxide has been added for pH adjustment. pH 8.3 (6.0 to 9.0). Liposyn III 10% has an osmolarity of 284 mOsmol/L (approx.) and a specific gravity of 0.995. The total caloric value of Liposyn III 10% including fat, phospholipid and glycerol is 1.1 kcal/mL. Of this total, approximately 0.5 kcal/mL is supplied by linoleic acid.
Liposyn III 20% contains 20% soybean oil, 1.2% egg phosphatides and 2.5% glycerin in water for injection. Sodium hydroxide has been added for pH adjustment. pH 8.3 (6.0 to 9.0). Liposyn III 20% has an osmolarity of 292 mOsmol/L (approx.) and a specific gravity of 0.988. The total caloric value of Liposyn III 20% including fat, phospholipid and glycerol is 2.0 kcal/mL. Of this total, approximately 1.0 kcal/mL is supplied by linoleic acid.
Both Liposyn III 10% and Liposyn III 20% contain emulsified fat particles of approximately 0.4 micron in diameter, similar to naturally occurring chylomicrons.
Soybean Oil, USP is a mixture of neutral triglycerides with the following structure:
















are saturated and unsaturated fatty acid residues. The major component fatty
acids are approximately 54.5% linoleic, 22.4% oleic, 10.5% palmitic, 4.2% stearic,
and 8.3% linolenic acid. These fatty acids have the following chemical and structural
formulas:








Egg phosphatides, purified, are primarily a mixture of naturally occurring phospholipids which are isolated from the egg yolk. These phospholipids have the following general structure:
















are the same saturated and unsaturated fatty acid residues that abound in neutral
fats. R3 is primarily either the choline [HOCH2CH2N(CH3)30H]
ester or ethanolamine (HOCH2CH2NH2) ester of
phosphoric acid (H3PO4).
Glycerin, USP is chemically designated C3H803 and is a clear, colorless, hygroscopic
syrupy liquid. It has the following structural formula:







Last reviewed on RxList: 2/2/2009




Liposyn III Drug Description
Liposyn® III
(Intravenous Fat Emulsion)
DRUG DESCRIPTION
Liposyn III (Intravenous Fat Emulsion) is a sterile, nonpyrogenic fat emulsion for intravenous administration. It is supplied in both a 10% and 20% concentration.
Liposyn III 10% contains 10% soybean oil, up to 1.2% egg phosphatides added as an emulsifier and 2.5% glycerin in water for injection. Sodium hydroxide has been added for pH adjustment. pH 8.3 (6.0 to 9.0). Liposyn III 10% has an osmolarity of 284 mOsmol/L (approx.) and a specific gravity of 0.995. The total caloric value of Liposyn III 10% including fat, phospholipid and glycerol is 1.1 kcal/mL. Of this total, approximately 0.5 kcal/mL is supplied by linoleic acid.
Liposyn III 20% contains 20% soybean oil, 1.2% egg phosphatides and 2.5% glycerin in water for injection. Sodium hydroxide has been added for pH adjustment. pH 8.3 (6.0 to 9.0). Liposyn III 20% has an osmolarity of 292 mOsmol/L (approx.) and a specific gravity of 0.988. The total caloric value of Liposyn III 20% including fat, phospholipid and glycerol is 2.0 kcal/mL. Of this total, approximately 1.0 kcal/mL is supplied by linoleic acid.
Both Liposyn III 10% and Liposyn III 20% contain emulsified fat particles of approximately 0.4 micron in diameter, similar to naturally occurring chylomicrons.
Soybean Oil, USP is a mixture of neutral triglycerides with the following structure:
















are saturated and unsaturated fatty acid residues. The major component fatty
acids are approximately 54.5% linoleic, 22.4% oleic, 10.5% palmitic, 4.2% stearic,
and 8.3% linolenic acid. These fatty acids have the following chemical and structural
formulas:








Egg phosphatides, purified, are primarily a mixture of naturally occurring phospholipids which are isolated from the egg yolk. These phospholipids have the following general structure:
















are the same saturated and unsaturated fatty acid residues that abound in neutral
fats. R3 is primarily either the choline [HOCH2CH2N(CH3)30H]
ester or ethanolamine (HOCH2CH2NH2) ester of
phosphoric acid (H3PO4).
Glycerin, USP is chemically designated C3H803 and is a clear, colorless, hygroscopic
syrupy liquid. It has the following structural formula:







Last reviewed on RxList: 2/2/2009




Liposyn III Drug Description
Liposyn® III
(Intravenous Fat Emulsion)
DRUG DESCRIPTION
Liposyn III (Intravenous Fat Emulsion) is a sterile, nonpyrogenic fat emulsion for intravenous administration. It is supplied in both a 10% and 20% concentration.
Liposyn III 10% contains 10% soybean oil, up to 1.2% egg phosphatides added as an emulsifier and 2.5% glycerin in water for injection. Sodium hydroxide has been added for pH adjustment. pH 8.3 (6.0 to 9.0). Liposyn III 10% has an osmolarity of 284 mOsmol/L (approx.) and a specific gravity of 0.995. The total caloric value of Liposyn III 10% including fat, phospholipid and glycerol is 1.1 kcal/mL. Of this total, approximately 0.5 kcal/mL is supplied by linoleic acid.
Liposyn III 20% contains 20% soybean oil, 1.2% egg phosphatides and 2.5% glycerin in water for injection. Sodium hydroxide has been added for pH adjustment. pH 8.3 (6.0 to 9.0). Liposyn III 20% has an osmolarity of 292 mOsmol/L (approx.) and a specific gravity of 0.988. The total caloric value of Liposyn III 20% including fat, phospholipid and glycerol is 2.0 kcal/mL. Of this total, approximately 1.0 kcal/mL is supplied by linoleic acid.
Both Liposyn III 10% and Liposyn III 20% contain emulsified fat particles of approximately 0.4 micron in diameter, similar to naturally occurring chylomicrons.
Soybean Oil, USP is a mixture of neutral triglycerides with the following structure:
















are saturated and unsaturated fatty acid residues. The major component fatty
acids are approximately 54.5% linoleic, 22.4% oleic, 10.5% palmitic, 4.2% stearic,
and 8.3% linolenic acid. These fatty acids have the following chemical and structural
formulas:








Egg phosphatides, purified, are primarily a mixture of naturally occurring phospholipids which are isolated from the egg yolk. These phospholipids have the following general structure:
















are the same saturated and unsaturated fatty acid residues that abound in neutral
fats. R3 is primarily either the choline [HOCH2CH2N(CH3)30H]
ester or ethanolamine (HOCH2CH2NH2) ester of
phosphoric acid (H3PO4).
Glycerin, USP is chemically designated C3H803 and is a clear, colorless, hygroscopic
syrupy liquid. It has the following structural formula:







Last reviewed on RxList: 2/2/2009





Other reviews about Liposyn III on wordpress

FDA MedWatch - Hospira Brand Propofol and Liposyn Products - Recall
  by irbtipoftheweek
Hospira, Inc.and FDA notified healthcare professionals of the recall of 85 lots of Liposyn II 10%, Liposyn II 20%, Liposyn III 10%, Liposyn III 20%, and Liposyn III […]


Clinical Journal April 19, 2010
  by LisaArmstrongRN
Clinical Journal 19 April, 2010 Patient:                                    C.N. Age:                                        70 Sex:                                         Male Admitted:                               03/24/2010, 06:20 Diagnosis:                               Colon Mass/Cholelithias Assessment Cardiovascular: AP Pulse                                 82, irregular rate and rhythm R Pulse                                    81 irregular, symmetrical Pedal Pulses                            1, irregular BP                                           158/72 BP Site                                    […]



Other reviews about Liposyn III on web:

Egg phosphatides, purified, are primarily a mixture of naturally occurring phospholipids which are isolated from the egg yolk. These phospholipids have the following general ... Liposyn®III INTRAVENOUS FAT EMULSION


Learn about the prescription medication Liposyn III (Intravenous Fat Emulsion), drug uses, dosage, side effects, drug interactions, warnings, reviews and patient labeling. Liposyn III (Intravenous Fat Emulsion) Drug Information: Uses ...


Learn about Liposyn III IV - its uses, dosage, side effects, drug interactions, and safety information on RxList. Liposyn III IV Drug information on Uses, Side Effects ...


Accurate, FDA approved Liposyn III information for healthcare professionals and patients - brought to you by Drugs.com. Liposyn III Official FDA information, side effects and uses.


Delivers prescribed calories and essential fatty acids ; Liposyn II is a 50/50 blend of soybean and safflower oil; Liposyn III is a soybean oil emulsion Hospira - Liposyn® (I.V. Fat Emulsion)


Learn about the prescription medication Liposyn III 30 (Liposyn III 30 Intravenous Far Emulsion), drug uses, dosage, side effects, drug interactions, warnings, reviews and patient ... Liposyn III 30 (Liposyn III 30 Intravenous Far Emulsion) Drug ...


Profession medical resources for "LIPOSYN III" including "Medical News: Fat and Anesthetic Distributor Expands Emulsion Recall - in Product Alert, Devices and Vaccines from MedPage ... LIPOSYN III - Professional Medical Resources


Find patient medical information for Liposyn III IV on WebMD including its uses, side effects and safety, interactions, pictures, warnings and user ratings. Liposyn III IV : Uses, Side Effects, Interactions, Pictures ...


[Posted 11/09/2009] Hospira, Inc.and FDA notified healthcare professionals of the recall of 85 lots of Liposyn II 10%, Liposyn II 20%, Liposyn III 10%, Liposyn III 20%, and Liposyn ... Hospira Brand Propofol and Liposyn Products - Recall


Liposyn III Drug Information from Drugs.com. Includes Liposyn III side effects, interactions and indications. Liposyn III Drug Information, Professional





Featured Reviews

Reviews Econazole Nitrate

Spectazole Drug Description SPECTAZOLE (econazole nitrate) Cream DRUG DESCRIPTION What are the possible side effects of econazole topical (Spectazole)? Serious side effects of econazole topical topical use are unexpected. Stop...
Read More  |  Review This
Reviews Captopril and Hydrochlorothiazide

Capozide Drug Description CAPOZIDE® 25/15 CAPOZIDE® 25/25 CAPOZIDE® 50/15 CAPOZIDE® 50/25 (captopril and hydrochlorothiazide) Tablets, USP USE IN PREGNANCY When used in pregnancy during the second and third...
Read More  |  Review This
Reviews Tolmetin Sodium

Tolectin Drug Description TOLECTIN® DS (tolmetin sodium) Capsules TOLECTIN® 600 (tolmetin sodium) Tablets For Oral Administration Cardiovascular Risk NSAIDs may cause an increased risk of serious cardiovascular thrombotic...
Read More  |  Review This
Reviews Bepotastine Besilate Ophthalmic Solution 1.5%

Bepreve Drug Description BEPREVE™ (bepotastine besilate) Ophthalmic Solution 1.5% DRUG DESCRIPTION BEPREVE™ (bepotastine besilate ophthalmic solution) 1.5% is a sterile, topically administered drug for ophthalmic use. Each mL...
Read More  |  Review This
Reviews Betoptic S

Betoptic S Drug Description Betoptic S® (betaxolol hydrochloride) Ophthalmic Suspension 0.25% as Base, Sterile Topical Ophthalmic Drops DRUG DESCRIPTION What are the possible side effects of betaxolol ophthalmic (Betoptic...
Read More  |  Review This
Recent News
59sec - the BEST lead management system around!
We tested 59sec - THE lead management system and we love it. 59sec helps small and medium companies to answer leads in maximum 59 seconds. Why...
MOVEorPAY - our favorite facebook app
We do love MOVEorPAY motivational facebook app, because it is very cool and useful. It makes you finish stuff that you know are good for you, but from various reasons, you never do...
ReviewsAZ is almost ready to be officially launched
yes, we have just a few loose ends to tie and we are ready to go :) meanwhile, I am putting some reviews on the site, so people will not get an empty site at the launch....